Uniseal® products replace traditional plumbing hardware with a single injection molded unit requiring no component parts. It was designed to solve many of the issues of pipe to tank connections. For many industries pipe to tank seals are traditionally among the most complex connections to manufacture. Traditional seals require multiple parts such as, rigid flanges, bolts, washers, o-rings, along with long assembly times and high production costs.

“Alcryn”® melt processible rubber is used to make Uniseal® products because it creates a tighter seal, can be processed faster, and is compatible with both water and oil based materials. It also has a coefficient of friction roughly three times greater than competing materials, which creates a better seal overall.

The greatest asset to Uniseal® products is that they are a quicker and easier installation process. A hole is cut in the side of the tank, and then the rubbery black Uniseal® is inserted. Next, a slippery detergent film (i.e. dish soap) is applied to the exterior of the pipe. The pipe is then pushed through the seal completing the installation. When the pipe is pushed through the rubber-like Uniseal® from the outside, the Uniseal® becomes thin enough to allow the pipe to slip through. With this simple design the Uniseal® solves many complex problems.

The ability of the Uniseal® to be used on flat or curved surfaces has allowed for its use in many industries including: wastewater management, irrigation, agricultural, electrical, rainwater recycling, hydroponics, and many more.

  • UNISEAL® reduces manufacturing costs. It replaces all the old hardware with a single injection molded unit requiring no component parts. Provides a liquid tight connection.
  • UNISEAL® is now used in the Building, Plumbing, Agriculture, Aquaculture, Marine, R.V. and Petrochemical Industries.
  • Standard UNISEAL®S are made to fit PVC and steel pipes 3/16″ to 6″ through wall thickness of 1/8″ to 1/2″.
  • Design and sophisticated material (ALCRYN®) allow us to warrant the Original UNISEAL for 25 years when used in accordance with the manufacturer’s instructions.
  • Every UNISEAL® manufactured is branded: Don’t be fooled by imitations.

Listed below are the standard stock sizes.
If you require another other size or have a special application for the UNISEAL®, please contact us and we will endeavour to solve your sealing problem.

Part #

DN#

Pipe ID

Pipe OD

Holesaw Size

U018

3/16″

0.250″ 06mm

0.375″ 10mm

U025

1/4″

0.375″ 10mm

0.50″ 12.7mm

U038

10

3/8″

0.675″ 17mm

1.00″ 25.4mm

U050

15

1/2″

0.840″ 21mm

1.25″ 31.7mm

U075

20

3/4″

1.050″ 27mm

1.25″ 31.7mm

U100

25

1″

1.315″ 33mm

1.75″ 44.4mm

U125

32

1-1/4″

1.660″ 42mm

2.00″ 50.8mm

U150

40

1-1/2″

1.900″ 48mm

2.50″ 63.5mm

U200

50

2″

2.375″ 60mm

3.00″ 76.2mm

U300

80

3″

3.500″ 89mm

4.00″ 101.6mm

U400

100

4″

4.500″ 114mm

5.00″ 127mm

U600

6″

6.625″ 168mm

7.00″

U600-35
6″
6.299″ 160mm
7.00″ 178mm

U400-35

4″

110mm

5.00″ 127mm

Metric hole tolerances +2mm

Instructions For Using UNISEAL®

1. Cut hole to the Holesaw size indicated for the UNISEAL® you are using.
Example 3″ UNISEAL® = 4″ Hole (Holesaw)

2. Ensure the hole is clean cut with sharp edges. Irregularities could cause poor seating and ultimate leakage.

3. Insert UNISEAL® into hole with the wideside facing the pipe to be inserted.

4. Make certain that the pipe end to be inserted is clean cut. File the edges so that there are no sharp points to cut the UNISEAL®

5. Using Detergent, lubricate the outside of the pipe end to be inserted, then push the pipe through the UNISEAL® from the large flange side.
The detergent will be squeezed off as the pipe passes through the UNISEAL® The co-efficient of friction of the rubber holds the pipe tightly in place.

UNISEAL® Simply The World’s Best Seal

  • Long Life
  • Easy To Install
  • Replaces And Outlasts Most Bolt-On Flanges
  • Can save up to 70% in labour and material costs
  • A product for the future

 

 

UNISEAL® Can Withstand:

  • Pressure & Suction
  • Acids & Oils
  • Greases & Gasoline
  • Sewerage & Waste
  • Heat & Cold

To Purchase your UNISEAL® online click on the below button, this will take you to our e-commerce web site marineandmore.co.nz.