SANISPLIT THE PATENTED MACERATOR SPLIT SYSTEM BOX UNIT

Sanisplit consists of a first water-collection unit, permanently fixed to the w.c. bowl and a second, removable, unit containing the operating mechanisim.

In the case of clogging, blockage or mechanical fault, Sanisplit enables you to detach the removable unit from the fixed one without having to disconnect the w.c. bowl and all the collection of waste pipes.

The wastewater collected from the pumping and grinding apparatus mostly contains solid organic residues, toilet paper and other similar residues normally treated by this type of products.Split System, is the complete solution to every problem.

However, unsuitable materials can clog the apparatus or cause malfunction, making maintenance work necessary.

Normally, for unclogging or doing any other work to repair mechanical failure, both the apparatus and the w.c. bowl have to be removed and all the pipes disconnected; this is a job that can only be done on the spot by a specialised technician, which means delays and higher costs.

The split-system macerator box unit:

Sanisplit/Profisplit is a plastic box with a built-in pump that automatically grinds and discharges the hot water (up to 100° C), acid and grease water, body waste and toilet paper, originating from either the bathroom or the kitchen, through a small pipe with a diameter of 32 or 40 mm. into the nearest sewer. It can be fitted to any European Standard w.c. bowl with horizontal outlet.

Sanisplit/Profisplit consists of a first water-collection unit, permanently fixed to the w.c. bowl and a second, removable, unit containing the operating mechanisms. In the case of clogging, blockage or mechanical fault, Sanisplit enables you to detach the removable unit from the fixed one without having to disconnect the w.c. bowl and the collection and waste pipes.

Exchange Service

If the appliance is out of order for any reason, even caused by the user, an exchange unit will be supplied within 24 hours if requested before 1500 hours working days.

Plumbers “call out” fees will apply. If the fault is due to manufacturing defects this fee will be refunded. Need more info then email us at:
[email protected]

Sanisplit can be purchased from:

  • Plumbing World
  • Mico
  • Reece Plumbing
  • Chesters
  • Oakley’s Bathrooms
  • Zip Plumbing
  • Harrison Bloy Plumbing

Specifications

Sanisplit
Profisplit
Power Supply:
230V ac
230V ac
Power:
600W
1000W
Electrical Absorbtion:
3A
4A
Frequency:
50 Hz
50 Hz
Revolutions per minute:
2700
2700
Protection Class:
IP 55
IP 55
Max. Elevation head:
11m
11m
Max. Capacity:
350 lt/min
350 lt/min
Service:
Intermittent
Intermittent
Sewage water temperature:
<100°
<100°
Condenser:
10 x 3.142 x F/450V
10 x 3.142 x F/450V
Pipe Discharge Size:
32-40mm dia
32-40mm dia
Sanisplit complies with the following standards:
Directive CE 89/392 – 89/336 – 73/23 – 93/
Profisplit complies with the following standards:
EN 12050-2Â EN 1205-3Â EN 12050-4

For more product specifications, detailed information and
a pricing guide click here

Important Installation Information, this needs to be read prior to purchasing & installation – Read More

Technical Data

(prices shown are in NZ$, Prices may change without notice, Freight ex Auckland store to be added.)

Sanisplit 1 $1,100.00 plus GST
Applications
Sanisplit 2 $1,335.00 plus GST

Applications
Sanisplit K2 $1,335.00 plus GST

Applications
Sanisplit 3/K3 Combi $1,535.00 plus GST
Applications
Sanisplit 1000 $1,885.00 plus GST

Applications
K-Kit:- Front entry kit for K2 or 3/K3 Combi – $50.00 plus GST
Sanisplit NK3:- Marine Sump & Macerator box (24v) – $2,200.00 plus GST

SANISPLIT complies with the following standards:
EN 12050-2   EN 12050-3   EN 12050-4

Specifications

Power Supply
Power
Electrical Absorption
Frequency
Protection Class
Max Elevation Head
Max Capacity
Sewage Water Temperature
Condenser
Pipe Discharge Size
 230 V AC
600 W
3 A
50 Hz
IP 55
11 m
350 lt/min
< 100°C
10πF/450V
Ø 32-40 mm

 

Important Information pre sale and installation

SANISPLIT Small bore macerator pump.

A guide to successful installation.

These are intended to be installed in the same room and adjacent to the fittings that will discharge into the pump. Typically this would be; – in a bathroom for a toilet, basin, shower: in a kitchen / laundry where the pump would be installed under the sink / tub.

In “public” toilets a Profisplit / Sanisplit 1000 is recommended.

Other locations are possible, but the installer should be aware that additional costs may be incurred for the pump to work to specification. These will be site specific. Mounting on an external wall:- Sanisplit is not weatherproof. If used outside it must be in a self-draining weatherproof box large enough to allow easy access for maintenance.

Install the Sanisplit in a way that allows easy detachment of the “pump” half. Remember – you may be the plumber who has to service it in the event of a blockage. Some Councils will not allow installation away from the fittings to be drained.

Mounting under the floor:- Consult us first. Extra venting may be needed. Discharge pipe:- 40mm waste pipe preferred but 32mm acceptable. Use 2 x 45° in preference to 1 x 90°. If the head more than 3m recommend a check valve at base of riser. Bends will reduce the flow rate.

Where possible pump immediately to the highest point, and then have a fall to the sewer connection. All pipe work should be to Building Code practice.

High volume / flow outlets (sinks, tubs):- Sanisplit should be installed under the fixture. Commercial kitchens (cafes etc.) should have a grease trap fitted before the Sanisplit. To protect against power failure a solenoid valve may be fitted to turn off the water supply and prevent flooding. NO tampons NO sanitary pads NO condoms NO paper towels