Prices are inclusive of GST + Shipping Nationwide.
-
Corner endsets are used for mounting when the rail runs into a corner. -
Multipoint endsets have 7 fixing holes, allowing the rail to be installed at almost any angle and still be securely fixed to a stud.Prices are inclusive of GST + Shipping Nationwide.
-
Pipe bends can be used to give extra lateral support to vertical rails.Prices are inclusive of GST + Shipping Nationwide.
-
‘T’ piece connector to extend the length of a rail. Consists of: One T-piece, one wall flange complete with washer and type 17 screws
Prices are inclusive of GST + Shipping Nationwide.
-
Tube connectors connects two rails together in a straight line for a longer continuous run of rail.Prices are inclusive of GST + Shipping Nationwide.
-
Two-way grab rail connectors with component bend option of either 30 or 90 degrees.Prices are inclusive of GST + Shipping Nationwide.
-
Slip resistant rails to provide stability and support around the house. Canterbury Concept’s rails are manufactured from 32 mm aluminium Features- Almond or White
- Rails are slip resistant to maximise grip and optimise safety
- Rails are finished to ensure maximum grip, in wet or dry conditions
- Ripple finish
Prices are inclusive of GST + Shipping Nationwide.
-
Blue grab rails to make life easier for those with visual impairment as the unique blue finish is easily identifiable. The finish is textured and slip resistant, pleasant to the touch with Canterbury Concept’s famous grip. Prices are inclusive of GST + Shipping Nationwide. -
A part that allows grab rail tubes to be joined together. These connecting pieces work on the same principle as the beach umbrella and allow rails to be connected at angles up to 45 degrees, up or down.Prices are inclusive of GST + Shipping Nationwide.
-
This base ring is used to build up one of the rails bases; when one end of a grabrail is on tiles and the other on a wall surface.Prices are inclusive of GST + Shipping Nationwide.
-
Plug end cap to finish a cantilevered rail.Prices are inclusive of GST + Shipping Nationwide.
-
End ring to support the end of a grab rail that pushes against the wall.Prices are inclusive of GST + Shipping Nationwide.
-
Four-way grab rail connectors used to connect a vertical rail to horizontal rails. This creates a 4-way intersection.Prices are inclusive of GST + Shipping Nationwide.
-
Finish a rail at 90º to wall or floor. The Large End Ring can be used for rails extending from floor to ceiling, or with pipe bend (PB) and connecting (CR) for added lateral support to vertical rails.Prices are inclusive of GST + Shipping Nationwide.
-
Holds the shower head and handset so they may be moveable up and down the vertical grab rail.Prices are inclusive of GST + Shipping Nationwide.
-
Wall bracket allowing for 270 degree hand travel. Used to support a cantilevered rail, or long lengths of grabrail in a corridor.Prices are inclusive of GST + Shipping Nationwide.
-
Corner endsets are used for mounting when the rail runs into a corner.Prices are inclusive of GST + Shipping Nationwide.
-
Full base endset to provide stability and support around the house. Consists of: Two elbows, two wall flanges, complete with washers and type 17 screws.Prices are inclusive of GST + Shipping Nationwide.
-
Full base endset to provide stability and support around the house. Consists of: Two elbows, two flanges, complete with washers and screws.Prices are inclusive of GST + Shipping Nationwide.
-
Three-way grab rail connectors used to connect a vertical rail to a horizontal rail. Often used for the mounting of a shower slide and shower handset.Prices are inclusive of GST + Shipping Nationwide.
-
System 900 Support Shower T Rail Comes in Size: 1250mm x 765mm and Finishes:Chrome Brushed Stainless Steel Powder Coated: Matte White Matte Black Dark Grey Pearl -
System 900 Support Shower Rail Comes in Sizes
and Finishes:900mm 1100mm Chrome Brushed Stainless Steel Powder Coated: Matte White Matte Black Dark Grey Pearl -
HEWI System 900 Support Rail Comes in sizes:
And Finishes:300mm 400mm 500mm 600mm 700mm Chrome Brushed Stainless Steel Matte White Matte Black Matte Dark Grey Pearl -
PREMIUM line: 700-900mm slider bar 20mm Ø ▪100% stainless steel slider bar ▪Pipe thickness 2 mm ▪100% stainless steel sliding wall brackets ▪100kg load capacity ▪Anti twisting flex hose on both ends: easier to handle and more durable ▪Sliding hand-shower holder with facilitated push control: for a quicker and easier adjustment of the height of the shower head ▪Fixing screws included (Fisher DuoPower). Screw 6x80 stainless steel ▪Multi jet shower head: 5 different water jet mode. 3 PVC layers, external and internal, with a further reinforced thickness. Extreme strength and flexibility. Price is inclusive of GST. Shipping is $20 North Island and $40 South Island -
550mm Toilet Roll holder & Rail. Freight is $15 North Island and $30 South Island Other colours to order are +50% -
Uniseal® products replace traditional plumbing hardware with a single injection molded unit requiring no component parts. It was designed to solve many of the issues of pipe to tank connections. For many industries pipe to tank seals are traditionally among the most complex connections to manufacture. Traditional seals require multiple parts such as, rigid flanges, bolts, washers, o-rings, along with long assembly times and high production costs. Read more about Uniseal Prices are inclusive of GST + Shipping Nationwide.
